Enerzone Euromax Owner's Manual download pdf (Page 9)

1.4. COMBUSTION AIR SUPPLY

It is mandatory to connect this stove to an outside

combustion air source to reduce the risk of hopper

burn back caused by negative pressure. An

insulated 4” inside diameter metallic pipe, either

flexible or rigid, must be attached to the inlet at the

stove’s rear (refer to figure 5). A rodent guard

(minimum ¼” wire mesh) must be used at the

terminus (refer to figure 7). All connections must be

secured and airtight by either using the

appropriately sized hose clamp and/or UL-181-AP

foil tape. Also make sure that the fresh air damper

is open while the stove is running. The fresh air

intake damper is located at the back of the stove

right hand side (refer to figure 6.).

For mobile home installations only:

• No combustion air supply may exceed 10 feet.

Sources of Outside Combustion Air:

• A hole in floor near stove rear terminating only

in a ventilated crawl space.

• A hole in the wall behind the stove.

FIGURE 6.

The fresh air intake damper

FIGURE 5

Rear view

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 55 56

No comments

Enerzone Euromax Owner's Manual Page 9