Enerzone Euromax Owner's Manual download pdf (Page 7)

1. INSTALLATION

1.1. FEATURES

ENERZONE EUROMAX FREESTANDING PELLET STOVE

• Width: 24”

• Height: 41”

• Depth: 28”

• Weight: 375 lbs.

• Flue size: 4”

• Hopper Capacity: Up to 125 lbs.

(This can vary

depending on pellet size, length, and diameter)

• EPA status: < 4.5 g/h

• Burn rate: 1.3 lbs to 8.5 lbs. per hour

• BTU range: 10,500 to 70,000

• Electrical consumption:

o 5 Amps lighting cycle

o 2.5 Amps. continuous duty

• Control board fuses: Main: 7.5A-250V fastblow

o Convection blower: 5A-250V fastblow

o Combustion blower: 3A-250V fastblow

o Exhaust blower: 3A-250V fastblow

o Auger 1: 3A-250V fastblow

o Auger 2: 3A-250V fastblow

o Ignitor : 5A-250V fastblow

• Electrical requirement: 120VAC 15A

• Approved installations: mobile home or

conventional

1.2. PREPARATION

Factory packaging must be removed, and some minor

assembly work is required prior to installation:

• The handle and door must be adjusted;

• The stove must be leveled using threaded legs;

• The door overlay must be installed on the door

frame

The LCD control must be installed on the back (left or

right) of the stove; (see appendix C )

1.3. CLEARANCES

The Enerzone EUROMAX has been tested and listed for

installation in residential and mobile home

FLOOR PROTECTION: minimum to 6” in the front and 6”

on each side of the door opening. The stove must be

placed on a continuous (grouted joints) noncombustible

material such as ceramic tile, cement board, brick, 3/8”

millboard or equivalent, or other approved or listed

material suited for floor protection.

NOTE: ceramic tile, or any tile, requires a continuous

sheet beneath to prevent the possibility of embers

FIGURE 3

Floor

rotection

Door opening

FIGURE 2

Corner installation

FIGURE 1

Back wall installation

1 2 3 4 5 6 7 8 9 10 11 12 ... 55 56

Comments to this Manuals

No comments

Enerzone Euromax Owner's Manual Page 7

Comments to this Manuals

Related products and manuals for Pellet stove Enerzone Euromax