Enerzone EB00002 Specifications download pdf (Page 43)

Solution 1.8 Installation and Operation Manual 43

Pedestal kit installation:

Follow step 1, 2 and 3 of the leg kit

installation.

5- Secure pedestal base to the underside

of the firebox using the bolts, washers

and nuts removed in step 3.

Note: Insert each bolt from the inside of the

firebox, this will allow the bricks to sit more

evenly on the floor of the firebox.

6- Gently flip the stove back on its

pedestal making sure not to put too

much weight on the rear edge of the

base.

7- Secure the air control cover to the

brackets under the ash lip with 2 screws

then install the coil handle on the control

rod by turning it counterclockwise.

8- Secure the pedestal backing panel to

the rear of the pedestal.

9- Open the ash drawer lid then slide it into

the front opening of the pedestal.

10- Position the stove for its installation and

reinstall the door and the bricks (see

Appendix 8: Exploded Diagram and

Parts List for layout).

Note: Make sure that baffle components

have not moved during the leg installation

process since a flue blockage may occur.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 55 56

No comments

Enerzone EB00002 Specifications Page 43